Search results

  1. D

    How Much will my Videoredo performance be enhanced if...........

    The big difference I noticed with an SSD and video editing in general, not just for VRD, was scrubbing around in the video was vastly improved. Off a single HDD there'd be delays and jerks when moving. With an SSD that pretty much went away. The almost 0 seek latency also lets me do things...
  2. D

    Is there a guide to properly deinterlace broadcast TV to mkv/h264?

    Have to agree with Dan here. With the way US TV gets chopped up as part of normal operations there is no simple answer if you want to drop it back down to the notional 24FPS and avoid occasional frame jumps as the 3:2 sequence is disrupted and changed during playout. Tack onto that the joys of...
  3. D

    Unable to initialize the video display

    Acceleration disabled, but the same error detail is seen in the log with it enabled. The 'Accel Flag' information remains set as 1 regardless of the option in the VRD GUI. 017-11-23 05:16:34 H264, Error initializing video: VMR 7 Error, BuildVideoMixingGraph-VMR 7 (Windowless), hr=0x80004001...
  4. D

    5.1.3.743 COM interface

    I've used COM to run VRD4 for ages without problem, and have turned to automate VRD5. Using the new application name (VideoReDo5.Application) to start launches VRD OK, but from there on it's all down hill. Properties such as OpenedFilename return an error - unknown name, as does SetQuietMode...
  5. D

    5.12.740 no pids specified

    Well hopefully this hasn't already been covered as a look around the beta section didn't turn up any mentions.... If I write a full transport stream to a file and then open it in Videoredo 5.12.740 it displays the first channel it came across without problem, but if I attempt to change to one...
  6. D

    644a refuses to jump forwards

    This is not a 644a specific problem as I've seen it with prior versions. I have VR set to force I frame seeks for jumps of two seconds or more. Occasionally VR refuses to move off the initial frame in a recording when a jump of 2 or more seconds is attempted. It will move forward frame by...
  7. D

    637g errors while seeking

    The stutter (skipped frames during playback) problem I mentioned with 635e and IPP decoding seems to be fixed, so I set about editing some transport files I have that contain MPEG-2. I manually edit files by hopping through the files at 10 second intervals rather than rely on ad detective...
  8. D

    635e IPP jerky preview

    When I enable IPP for display preview of MPEG-2 video is jerky. It looks like VR may only be displaying every second frame. If I hold down the right arrow instead of using preview motion is smooth. Turning IPP off and restarting VR produces smooth play during preview.
  9. D

    634d random COM output problem

    When I process MPEG-2 in a transport stream (audio is not recoded) with my simple com script occasionally VRD leaves the Output dialogue box open after it has signalled my script (script checks IsOutputInProgress every 100 ms) that it has completed output. When this happens the pause / abort...
  10. D

    634d output stalls with PCM audio

    When outputting edits from an AVC transport stream source file to elementary streams and converting the audio to PCM (using the default h264 elementary profile but changing audio to PCM) 634d stalls on the second scene with the yellow exclamation mark. VRD stays stalled until the process is...
  11. D

    634d very slow navigating AVC

    I have an Avermedia Dark Crystal HD capture station that I am trialling. It produces MPEG-4 AVC + MPEG2 audio in a transport stream. If I configure it to record HD 1920 x 1080i 20Mbit/sec videoredo is very slow to move around the recording file. Hopping around in 1 second increments takes...
  12. D

    3-10-2-596 becomes very sluggish

    At random times 596 becomes very slow to respond, even to the point that the small frame display with the audio waveform takes minutes to draw with each frame appearing after up to 30 seconds. Loading any file once the problem has happened continues to show the problem. The only way to resolve...
  13. D

    3-10-2-596 incorrectly detects media centre

    The configuration wizzard that appears after installing 3-10-2-596 on Win 7 64 bit incorrectly detects the computer is running Microsoft Media Center. Installed Windows is Windows 7 Professional - 64 bit Version 6.1 (build 7600)
  14. D

    chapter points inaccurate on stream errors

    In beta 3.10.1.587 when cutting a transport stream that has an occasional error in it the chapter points do not accurately reflect the cut points in the output file for cuts that occur after the error in the transport stream. Chapter points prior to any error in the source file are correct. A...
  15. D

    chapters and joiner

    I don't know if it did before or not but with 3.10.1.587 when outputting via the joiner VR does not create a chapters file. If it didn't do it before, this would be a good addition. :)
  16. D

    2.5.7.600 joiner non-functional

    I am attempting to build a single edited file from two bog standard .mpg files. The cuts are added to the joiner list in the usual fashion, but 'create video from joiner list' doesn't output anything after the output file name is entered. The VR log has one additional entry after attemtping...
  17. D

    improved multiple file editing

    At times I grab programs from unreliable sources such as via sat and use two separate recordings to produce a good output file. At the moment this is a bit of a pain with VR with the only way I can see to do it (without constantly loading and unloading source files) is to use two instances of VR...
  18. D

    what happens to 2.5 users?

    Now that ver 3 is out what happens with people that continue to use 2.5? The current release (2.5.6.512b2) has quite a few issues that were resolved in what became ver 3 and IMO should be fitted into the 2.5 line.
  19. D

    531 not defaulting to AC3 audio

    I have no idea if its a configuration item or not, but my 531 installation isn't automatically picking up the AC3 audio as the preferred audio in transport stream type recordings. The source can be a .ts as produced by a PC DVB card or from a Topfield TF5000 PVR. Both MPEG and AC3 audio are...
  20. D

    build 527 project quick save remembers invalid locations

    If an invalid path/filename is entered using CTRL+P to save a project even though an error appears warning about the problem pops up, a valid name / path is never prompted for. Additional presses of CTRL+P just pops up the error. In the case of an invalid filename / path being entered, CTRL+P...
Top